DJI - Phantom 2 Vision+ V3.0 - Firmware Update - V3.12

DJI – Phantom 2 Vision+ V3.0 – Firmware Update – V3.12

Phantom 2 Vision+ Main Controller Firmware v3.12

Overview
– Flight controller firmware has been updated to v3.12.

Major New Features
– No-Fly Zones have been updated to include a 25km radius centered in Washington, DC.
– The compass calibration program has been optimized to improve reliability.
– When automatic landing is initiated, users can now continue to control the aircraft’s position and altitude. During this process, the maximum speed of ascent is 1 m/s.
– After an automatic landing has been completed and the motors have stopped spinning, users can immediately restart the motors and begin a new flight.

Special Note
– It is recommended that the compass be calibrated in an environment that is free from sources of potential interference. If you become aware of any source of potential interference, move to a different location and calibrate the compass again. Be aware that underground metal pipes may cause interference when the aircraft is close to the ground during compass calibration.

DJI - Phantom 2 Vision+ V3.0 - Android App Update - V1.0.58

DJI – Phantom 2 Vision+ V3.0 – Android App Update – V1.0.58

Heute hat DJI ein Update der Android App raus gebracht.
Hierbei handelt es sich um ein Update von V1.0.56 auf V1.0.58.
Laut DJI ChangLog beinhaltet dieses Update folgendes:
– Android 5.0.1 crash issue fixed
– Bug fixes

Die Behebung des Android 5.0.1 kann ich nur bestätigen.
Wurde auch Zeit das dieser Bug behoben wurde. Jetzt stürtzt mein Handy auch nicht mehr ab wenn ich die Motoren starte. Wenn jetzt noch die neue Firmware 100% läuft, kann man die App auch richtig ausnutzen.

DJI zieht Firmware Update 3.10 zurück

DJI zieht Firmware Update 3.10 zurück

Am 30.01.2015 veröffentlichte DJI einige Updates unter anderen auch ein Firmware Update von Firmware 3.08 > 3.10.
Einige Tage später zog DJI dieses Update wieder zurück.
Alle Nutzer die schon auf 3.10 aktualisiert haben, sollten laut DJI ein downgrad machen auf die letzte Version 3.08. Angeblich komme es bei der neuen Version zu Fehlern. Hier einmal die Original Meldung von DJI:

Dear DJI Customer,

There have been a small number of reported issues with the latest Phantom firmware, v3.10. In response to these reports, DJI has proactively suspended this firmware update.

If you already updated your Phantom firmware to v3.10, please reset your firmware to the prior version (v3.08) immediately. To do this, connect your Phantom to your PC, launch the DJI Phantom Assistant software, and follow the standard procedures for updating your firmware. V3.08 has now been designated as the latest version, and your Phantom will be reset.

If you have not yet updated your Phantom firmware to v3.10, and your current firmware version is v3.08, no action is necessary.

If you are running an older Phantom firmware version, DJI suggests that you update to v3.08 now.

Check your firmware status and apply any available updates by connecting your Phantom to your PC, launching the DJI Phantom Assistant software, and clicking “Upgrade”.

iOS Note: Some iOS users may experience issues when using Phantom firmware v3.08 with the latest iOS app (v1.0.46). To address this issue, an updated iOS app (v1.0.48) has been submitted to the App Store for approval and will be available soon. If you require the VISION app to fly safely, please wait for the updated app. No update is required for the Android version of the VISION app.

If you have any questions, please contact support@dji.com.

Thank you,

DJI

Also am besten immer ein paar Tage (Empfehlung sind 14 Tage) warten und erst dann ein Update machen.
Was es neues bei der 3.10 Version gegeben hat, kann man hier nachlesen. Wann es jetzt eine stabile Version 3.10 oder höher gibt, steht noch nicht fest.

DJI - Phantom 2 Vision+ V3.0 - Firmware Update - V3.10

DJI – Phantom 2 Vision+ V3.0 – Firmware Update – V3.10

Hinweis!!!

Laut DJI sollten alle die die neue Firmware 3.10 aufgespielt haben, diese vorerst wieder downgraden auf die Version 3.08

 

Heute hat DJI neue Versionen für folgende Treiber, Apps und Software ins Netz gestellt. Betroffen von diesen Updates sind folgende Komponenten:

DJI FC200 Camera
V1.3.0g
2015-01-16

iOS App
V1.0.46
2015-01-23

Android App
V1.0.56
2015-01-23

Phantom 2 Vision+ Autopilot System
V3.10
2015-01-30

PC Assistant Software
V3.8
2015-01-30

Mac Assistant Software
V3.8
2015-01-30

Treiber Updates können wie gehabt über die PC bzw. Mac Assistant Software durchgeführt werden. Die App Updates erfolgen über den App Store von Google bzw. Apple.

Hier mal der ChangeLog von DJI:

Firmware Updates on January 30, 2015
Overview:
a) Flight controller firmware updated to v3.10.
b) DJI Phantom Assistant updated to v3.8.
c) DJI VISION App updated to iOS v1.0.46, Android v1.0.56.
d) DJI Phantom 2 Vision+ FC200 firmware updated to v1.3.0.
Major New Features
a) No-Fly Zones updated to include a 25km radius in Washington, DC.
b) The iOS VISION app is compatible with iOS 8.0. The Android VISION app is compatible with Android 5.0.
c) GPS Signal Notice added to the VISION app. The VISION app will display a pop-up tip when attempting to takeoff without a sufficient GPS signal.
d) Rear LED display added to the VISION app to show the aircraft’s current flight status.
e) Upgrade Range Extender option added to the VISION app (iOS). When upgraded, it is possible to use a mobile device’s data network to access internet functions while connected to the Phantom.
f) Ability to view and download manuals and new manual notices added to the VISION app.
g) The latest DJI Phantom 2 Vision+ FC200 firmware fixes the issue of the camera failing to start in some cases.
h) The latest DJI Phantom 2 Vision+ FC200 firmware adds the ability to modify the filename prefix of photos if using the DJI SDK.
i) “Upgrade All” function added to the DJI Phantom Assistant.
j) When the aircraft is landing automatically, users can control the aircraft’s position and altitude. During this period, the max ascent speed is 1 m/s.
k) Users can start the motors to take off immediately after the motors have stopped following auto landing.